Hello all! Yesterday, we (being us here at Vintage Image Films!) released our second official short film, “The Minute Glass”, about a man who must kill himself before the time on a minute glass runs out, or else his wife will be killed by the people who are robbing him. The film was shot for zero dollars and zero cents, and will be linked to at the end of this article.
I emphasize the non-existent budget because I want my readers to understand the value of that statement. It isn’t a brag, or a flashy thing to show around, because sometimes, a zero-budget can actually be frowned upon. I am merely attempting to demonstrate that a film CAN be made for no money (minus equipment costs, which never count as part of the budget on a film, unless rented specifically for that film). Perhaps a zero budget film will not be the next Hollywood blockbuster, but it can be an artsy, well-crafted piece of cinema made with love, (fake) blood, sweat, stress and immense passion. The key ingredient we had for our film was a script, intentionally written to fit our circumstances. The script contained 4 characters, a minute glass, a cell phone, a straight-razor and some fake blood, which we already had lying around.
Now for the most part, I did everything myself, with a little bit of help from my great collaborator Vincent Diamond, a talented cinematographer and sound editor. To go into depth on our process would not take much time as it was very simple, quick, and to the point. And so I shall elaborate.
Writing The Script.
To start, I wrote the script by myself in about a day. I had planned some sort of home-invasion flick where a man and his wife would be intruded by some robbers who are neck deep in trouble from the mob, needing some quick cash to pay them back. So they would choose, at random, my character’s home, kidnap the wife, and hold her for ransom until they got the cash they needed from her husband. But I knew I didn’t have the necessary actors for this, so I decided against showing the actual invasion in-lieu for showing the aftermath. With that, I knew I had a minute glass and a cool straight-razor, so I wrote them into the story. The story we filmed is as follows: James McDermott (the husband) must kill himself within 60 seconds, so a second robber can safely come in and take the money out of his lockbox, and bring it back to the main robber, who has James’ wife, Stella. If James does not complete this in 60 seconds, they will all die, as bombs are triggered to every watch, clock, and glass, in the film. Of course, the robbers were not dumb enough (or smart enough) to set this elaborate plan up themselves. They would never put themselves in death’s reach. It has all been set up by the mob (who are never present on screen, and only mentioned vaguely), who the robbers owe money to. Well, long story short, James does not complete killing himself before the glass runs out, and right after he finishes slicing his own throat with the straight-razor, he hears his wife explode via speakerphone on a private cell phone call from the robber. The second robber comes inside and sees James. He checks the lockbox only to find there actually never was any money in it in the first place, but a vulgar note telling them to “eff off”. The robber finishes James off with a gun, then smokes a cigarette as his clock counts down until the room explodes…… FADE OUT.
Now when I wrote this, I knew I had CGI bomb effects, and explosion sound effects at my disposal, as well as muzzle flashes for guns, gun sounds, and a realistic-looking airsoft gun “prop” (I ended up not using the CGI explosion as I found cutting to black seemed more effective). Sometimes, I log information like this into my brain, and when I go to write a script, it comes out as needed. I always write for what I know I have, and my brain seems to actively help me do this on its own.
Shooting The Film.
Before shooting, I planned out all of the shots via shot lists (free film paperwork can be found here). The shot lists comprise all of your angles, camera movements, and short descriptions of shots on an easily-readable document, so you can work as smoothly and quickly as possible on-set. The way to write your shot list is to know your script by heart, close your eyes, and watch your film in your head, cut for cut, shot for shot, and transcribe what you see into properly-formatted terms.
Once I had the shot list in place, it was time to make a list of all props, set decoration (like chairs, furniture, tables, etc), clothes that would be worn (wardrobe), the actual gear, and extra things like fake blood, clothes-pins, etc. Our gear comprises of a Nikon D3100 DSLR camera, two lenses (the 18mm-55mm kit lens, and a Nikon 50mm f/1.8D), a Zoom H4N external audio-recorder, many PNY Professional-Grade SD cards, a fluid-head tripod, a pair of headphones for audio monitoring, “can” lights with fluorescent, halogen, and incandescent light-bulbs, white poster board to use as what’s called a “bounce” (for reflecting light to your subject when you don’t require the full light directly on it), and finally, miscellaneous items such as thick black construction paper to wrap around the lights, guiding their flow exactly where you want it, and a thousand or more clothes-pins to clip the construction paper onto the lights.
We set up our first angle, and filmed the entire scene in one take, three separate times, noting continuity things, such as, I pick up the straight-razor with my right hand, I use the phone on my right ear, etc. This is necessary in order to make sure each angle matches the next, because, contrary to popular belief, a lot of sets do not use multiple cameras filming at the same time, but instead, film the same scene several times from different angles, using one camera. This is where editing comes into play, but we’ll get to that. We filmed the same scene three times from one angle, moved the camera to a different angle, filmed the same exact thing three more times, switched the angle, did it three more times again, and so on, so forth. (I prefer to do this as a director to not only make sure I have all of the coverage I need, but to assure myself that at least some portion of each three takes per angle will be good enough for use)
After this, we filmed what are called insert shots. Insert shots are things that are not your main subject (which is usually the actor(s)), but sometimes need to be focused upon to establish certain elements, and if not for important reasons, to at least develop a bit of style in the film. Cases of insert shots in my film are closeups of my hand grabbing the straight-razor and/or cell phone, turning the minute glass over, and the final robber grabbing the candle to light his cigarette. These shots are great for establishing small portions of the location, as well as establishing important objects within the scene, which in my film’s case, the objects are almost characters in themselves.
Lighting The Scene.
Now we come to lighting, which probably should have been mentioned before filming, but I wanted to save it for last, as it can be the most tricky aspect. My philosophy on lighting, and my cinematographer Vincent Diamond’s views on it as well, are to walk on set, hook up a light in the one location you know for a fact you want one. In our case, we wanted a sort of quazi-noir look, so we placed the first light directly above the actor (me) and table, which gave off a sort of “interrogation scene” vibe, and I liked it. But if you know anything about filmmaking, you’ll know that one light is never enough. I knew I wanted an immense amount of shadowing on the right side of my face, so we placed another light at about the same level I was sitting, directly facing me, to the left, which gave the intended effect. Looking through the camera, I was fairly happy, but I needed a bit more. Suddenly, we got the wild idea to place a third light underneath the glass table I was sitting at, which shined up through, lit my chin up, and gave a sort of supernatural-surreal look to the scene, as light would never normally pour out from under the table in real life. Looking through the camera, I saw that it wasn’t too obvious (because you never want viewers to really notice what you’re doing, where lights are, what’s a dubbed sound and what’s not). I was really happy with the overall look, so we used it.
That’s my, and Vincent’s, ideology on lighting a scene. Walk in, set your camera up at the particular angle you like, start with one light, make sure it looks good through the camera’s lens (because what might look good with your eyes might look bad through a lens), and continue building upon it, one light at a time, because one light is never enough (unless your one light is the Sun, then you might actually need something to diffuse it!).
That’s all for this part. Next (and final) volume, I shall discuss the entire editing, color correcting, and color-grading process, as well as sound effects, and sound editing.
Don’t forget that we are doing an in-depth “behind the scenes” documentary which will teach you all you need to know to make your first short film for nothing (as well as being overloaded with my own cinematic opinions).
And finally, don’t forget to watch the actual short film you just read so much about! You can find it here.
Thanks for reading, and thanks in advance for watching! Feel free to leave comments, criticism and concerns in the comments section.
written by Kyle Oliver, 7/10/2014
Copyright 2014 by Kyle Oliver
Kyle Oliver is an award-nominated filmmaker for his first short film Numb, which he wrote and directed. He is also the CEO/Owner of Vintage Image Films. You can find him on Twitter @ThatKyleOliver, and Vintage Image Films on Facebook at http://www.facebook.com/VintageImageFilm